Skip to content
espresso machine sale

Home › Guides › Best lever

The best lever espresso machine for home

A lever machine lets you drive the shot by hand. That buys you a hands-on ritual and a pressure curve you control, and it costs you speed and convenience. Here is how the types differ and which machines are worth buying.

By Daniel Russo. Updated .

A lever press, moka pot, capsule machine and pump espresso machine on one table
The short answer

The best lever espresso machine for a full home setup is the Profitec Pro 800, a spring-lever machine with a PID-controlled 3.5 L copper boiler. The best value lever is the Flair 58, a direct lever with a heated brew head and no steam. The Cafelat Robot is the simplest and most rugged, and the La Pavoni Europiccola is the classic Italian lever with a steam wand. If you want manual control without the learning curve, buy a flow-control machine instead.

Our picks

Best full lever machine

Profitec Pro 800

$3,000 and upLever

A spring lever from the German brand Profitec, with PID temperature control and a 3.5 L boiler big enough for back-to-back milk drinks. Best for the intermediate or advanced home barista.

Portafilter
58mm, spring lever group
Heating
Single 3.5 L copper boiler with PID, dipper-style brew circuit
Pressure
Spring lever, manual low-pressure pre-infusion by hand
Milk
Commercial steam wand

Why we like it

  • Spring lever with a declining-pressure shot and a PID-controlled boiler for steady temperature
  • Steam is on tap from the 3.5 L boiler, so milk drinks do not wait on a mode switch
  • Runs from a 2.8 L reservoir or a plumbed water line

Keep in mind

  • Steep learning curve and a high price
  • No push-button repeatability

Best value lever

Flair 58

$500 to $650Manual

A direct lever with a walnut 58mm portafilter, a pressure gauge and an integrated three-setting preheat controller. Small and portable, with no steam wand.

Basket
58mm
Heating
Electric preheat for the brew head
Pressure
Hand lever with gauge
Milk
None

Why we like it

  • Hand-pulled espresso with real control
  • Heated brew head for steady temperature
  • Pressure gauge

Keep in mind

  • No steam wand
  • Needs a capable grinder

Most rugged lever

Cafelat Robot

$350 to $450Manual

Cast aluminum body, no electronics and no preheating. A great first manual machine for people who already own a fine grinder.

Basket
58mm
Heating
None, room temperature parts
Pressure
Two arms, gauge on some versions
Milk
None

Why we like it

  • Very simple and nearly indestructible
  • No preheating needed
  • Fun to use

Keep in mind

  • No milk steaming
  • Needs a fine, consistent grinder

Best classic lever with steam

La Pavoni Europiccola

$900 to $1,200Lever

The traditional Italian piston lever with a built-in boiler and steam wand. Charming and repairable, but it takes practice.

Portafilter
51mm
Heating
Boiler
Pressure
Spring-free lever
Milk
Steam wand

Why we like it

  • Classic Italian lever design
  • Steam wand for milk
  • Repairable for decades

Keep in mind

  • Steep learning curve
  • Group gets very hot after several shots

Compare

Lever machines compared
MachinePortafilterBasketHeatingPressureMilkPrice bandPrice
Profitec Pro 80058mm, spring lever groupNot listedSingle 3.5 L copper boiler with PID, dipper-style brew circuitSpring lever, manual low-pressure pre-infusion by handCommercial steam wand$3,000 and upCheck price
La Pavoni Europiccola51mmNot listedBoilerSpring-free leverSteam wand$900 to $1,200Check price
Flair 58Not listed58mmElectric preheat for the brew headHand lever with gaugeNone$500 to $650Check price
Cafelat RobotNot listed58mmNone, room temperature partsTwo arms, gauge on some versionsNone$350 to $450Check price

The three kinds of lever

The word lever covers three different designs, and they feel nothing alike.

TypeHow the shot is drivenExampleWhat it needs
Spring leverYou pull the lever down to compress a spring, pre-infuse at low pressure, then release. The spring pushes water through the puck, starting around 8 to 9 bar and tapering off.Profitec Pro 800A powered boiler and a learning curve
Direct leverYou press the lever yourself and watch a pressure gauge, so you decide the pressure at every second.Flair 58, La Pavoni EuropiccolaHand strength and technique; the Flair needs a kettle, the La Pavoni heats its own boiler
Boilerless manualYou heat water in a kettle, pour it into a chamber, and press a lever or plunger.Cafelat RobotA kettle, a scale and a fine grinder

The declining-pressure curve of a spring lever is the reason people love them: it is said to give shots sweetness and body. That is a matter of taste. Any well-built machine with a good grind and dialed technique makes excellent espresso, and a lever is not automatically better.

What you give up

  • Speed. Flair says a shot takes under three minutes including preheating the brew cylinder, prepping the puck and heating water.
  • Repeatability. There is no volumetric dosing and no push-button recipe. Every shot is technique.
  • Milk. The Flair and Robot have no steam wand. You need a separate steamer or frother. The Flair brand sells a stovetop and an electric steamer, and the Pro 800 and Europiccola have their own wands.
  • A good grinder. Flair says a stepless burr grinder is required for the 58 and suggests spending at least $150. A pressurized basket is included for forgiving results with a weaker grinder.

What to look for

Basket size and capacity

The Flair 58 and Cafelat Robot use 58 to 59 mm baskets; the Flair 58 lists a 16 to 20 gram dose with a 90 ml water capacity and a yield of up to 55 ml. A bigger basket makes a gentler, more forgiving shot but needs more force to reach 6 to 9 bar. In one independent comparison of boilerless levers, the Flair 58 needed more force than many expect for its 58 mm basket.

Thermal management

Boilerless machines lose heat, so preheating matters. The Flair 58 Plus 2 has a controller in the base with three settings: 85, 90 and 95°C (185, 194 and 203°F), meant for dark, medium and light roasts. The Robot needs no preheating step.

Footprint and weight

The Flair 58 Plus 2 weighs about 12 lb (Flair's spec) and its base is 7.5 inches wide by 13 inches deep. It stands about 11 inches tall with the lever lowered. An independent comparison lists the Flair 58 at about 3.8 kg (8.3 lb), among the heaviest of the boilerless group, so it suits a car trip more than a backpack. The Cafelat Robot is one of the models that dedicated enthusiasts pack for train or plane trips.

Cleaning and upkeep

Boilerless machines need only a wipe and a flush with clean water, and Flair says its 58 Plus 2 needs no descaling. A boiler machine such as the Pro 800 or Europiccola needs descaling like any other.

Lever or flow control

If what attracts you is control over the shot, not the mechanical ritual, a semi-automatic with a flow-control paddle gives you much of that control with more repeatability. One retailer's guide points to the ECM Synchronika II with Flow Control, the Profitec RIDE with Flow Control and the Profitec DRIVE for this, and notes that the Profitec Pro 800 is the only lever machine it considers worth recommending. A paddle is a valve you throttle over a pumped shot, not a spring.

See the best dual boiler machines if that is closer to what you want.

Who should buy a lever and who should skip

Buy one if you enjoy craft, you are willing to pull imperfect shots while you learn, and you already own or will buy a capable grinder. Skip one if you want a quick, repeatable latte every morning, or you want one-touch milk. For that, look at the best manual machines, the semi-automatics or a super-automatic.

Questions people ask

Is a lever espresso machine better than a pump machine?

Not automatically. A lever gives you a hands-on process and, on a spring lever, a declining pressure curve. A well-built pump machine with a good grinder and good technique makes excellent espresso too. Buy a lever for the experience, not because it must make better coffee.

Are lever machines good for beginners?

They are harder than push-button machines. Flair says its 58 Plus 2 is not only for advanced brewers and includes a pressurized basket that needs less from the grinder, but all levers need a scale, a kettle and practice.

Do lever machines need electricity?

Spring levers like the Pro 800 do, to heat their boilers. Direct levers like the Robot and boilerless Flair models use only a kettle, though the Flair 58 Plus 2 has an electric preheater that unplugs for travel.

Can a lever machine steam milk?

Only some can. The Profitec Pro 800 and La Pavoni Europiccola have steam wands. The Flair and Robot do not, so you need a separate frother or steamer.

What grinder do I need for a lever machine?

An espresso-capable burr grinder with fine, repeatable adjustment. Flair recommends a stepless unit and spending at least $150. See the best espresso grinders.

Sources

  1. Clive Coffee, the best manual lever espresso machine and alternatives
  2. Flair Espresso, Flair 58 Plus 2 product page
  3. The Lever Mag, boilerless lever espresso machines compared

Read next